[Hunerd Proof 1371]

I personally plan to put Magpul's own front and rear sights and co-witness them with a Bushnell holosight (don't think I'll be able to afford an EOTech). Might put on an ATN Gen 1 NV scope for hog and coyote control, but only if money allows. How bout you?

 

[ACRFan]

I am thinking of putting a KAC front and rear sight, an EOtech XPS2. I kinda like the remington forearm myself. I will put a shorty VFG on it as well.

 

[anubismp]

I like HK style fronts so I'd probably go with PRI Troy or Yankee Hill for the front and back. Tritium dots too.

 

[leadpersuasion]

Aimpoint Micro T-1 in a Larue mount.

 

[ACRinfidel]

[quote author=leadpersuasion link=topic=23.msg152#msg152 date=1263511694]
Aimpoint Micro T-1 in a Larue mount.
[/quote]
that's exactly the setup I'm rolling with. My wife got them for me.

 

[ACRFan]

Given the weight of the ACR. If I was to actually be able to afford one, I wouldn't buy any optics. Why, because the smallest of optics would make the rifle too heavy.

 

[[email protected]]

Aimpoint Micro H-1 w/larue mount; I don't have any NVG gear and don't think I'll have need for it any time soo.

 

[cjt50]

Gonna go with a set of troy folding sights and an Eotech XPS2.

Didn't really care for the magpul BUIS and the troy's I already have seem to have a clearer sight picture to my old eyes.

 

[ACRguy556]

EOtech EXPS2-0

 

[ACRMATT]

Right now I am running a XPS 3-2 and a Eotech 3x magnifier, and the stock MBUS. One thing to note if you are going with a similar set up, before zeroing make 100% sure the charging handle will come all the way back before locking in the optic. I mounted my XPS a slot or 2 too far forward because I didnt want to mess around with my factory location MBUS.

 

[DSM]

Troy Micros and a T1 or H1 in a LaRue mount eventually. And that's probably about it.

 

[ACRMATT]

[quote author=ACRFan link=topic=23.msg390#msg390 date=1272203527]
Given the weight of the ACR. If I was to actually be able to afford one, I wouldn't buy any optics. Why, because the smallest of optics would make the rifle too heavy.
[/quote]

Seriously???????

 

[ACRguy556]

Sticking with the MBUS sights for now but going to mount an EOtech EXPS2-0 later this week.

 

[TRWM14]

I put a set of Troy sights and an EOTech on mine. I don't like the Magpul plastic sights that came with it and had the Troy's just sitting in my spares box.

 

[chadr0]

Im putting an Aimpoint Comp M3 with a LaRue Tactical RAS II mount on mine.

 

[IXLR8]

OK, maybe I went a little crazy... I mounted a Bushnell 4200 Tactical FFP on some A.R.M.S lever mounts. I tried to boresight it, but my .223 laser was low on juice.

I started at the 50 yard targets, and the first shot was on the paper. Being that the scope was a mil-dot scope and the adjustments were 0.10 mil, it only took 4 shots to put it in the bullseye. If you have never used a First Focal Plane scope, it makes the mil-dots exactly 1 mil at any power, from 6x to 24x.
The adjustments are easy at any range.

Too much scope for the rifle? Probably. But it is quite impressive in its accuracy. Plus you don't need a spotting scope...

 

[VB]

Thinking FDE Troy sights with an Aimpoint M4S with Larue Mount.

 

[undercover]

schmeidt & Bender

 

[dauspopo]

Currently running the factory MBUS and an Eotech XPS on mine.

 

[Jamie Benedickt]

Nikon M223 2-8x32 with BDC reticle.