ACR Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
1,161 Posts
Discussion Starter · #1 ·
What do look for in a used ACR? Seller tells me that the recall was already done, but anything else to inspect? Will use my M16/M4/general experience to check for any chips, cracks, etc. Already looked at the bolt, carrier and firing pin and all that but curious if I should be on the lookout for anything else.

Thanks!
 

· Registered
Joined
·
2,791 Posts
Your on the right path for checking things. Make sure all rail screws are tight, make sure the gas piston is moving freely, Make sure there is no binding when you hand cycle the action, (should feel smooth) And like you said check for obvious sign of misuse and abuse.

Good luck!!
 

· Registered
Joined
·
1,586 Posts
Check that the barrel sits centered in the receiver. Some early ACR's had barrels that would be angled to the left (when shouldered). Then the normal BMW; Broken Missing Worn.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top