ACR Forum banner
1 - 18 of 18 Posts

· Registered
Joined
·
226 Posts
I have my paperwork in to BATF and E for an AAC M4-1000. Should get the approval sometime in April. All I have is my iPhone but I can do a short video...if you guys are interested. I promise it won't be too glossy.
 

· Premium Member
Joined
·
4,922 Posts
here you go, aac m4-2000 on my 16" acr

its now a 10.5 and still sounds great

 

· Premium Member
Joined
·
4,922 Posts
It rang a little bit from the blackout but I really didn't hear it from the shooters end, funny thing is that the phone picked up more of the sound from the rifle than our ears did, I actually pulled my plugs out bc I thought something went wrong lol, I've done some night shots with night vision on my 416, it has very little flash even with a 10.5"

Im going to go out this weekend and see if I can get a video of my new setup with the Aac brake
 

· Registered
Joined
·
226 Posts
It rang a little bit from the blackout but I really didn't hear it from the shooters end, funny thing is that the phone picked up more of the sound from the rifle than our ears did, I actually pulled my plugs out bc I thought something went wrong lol, I've done some night shots with night vision on my 416, it has very little flash even with a 10.5"

Im going to go out this weekend and see if I can get a video of my new setup with the Aac brake
Oh yes! For one, I am sure there are others too, would love to see the videos!
Good Shooting!
 

· Registered
Joined
·
242 Posts
I'm working on saving up for 3 suppressors. All AAC. I know they are expensive but my dad always told me do it once and do it right. Same kind of motto for the ACR.

I'd like to get a Ti-Rant 9, 762-SDN-6, and a Titan-SS. I have a M&P 9 begging for a suppressor right now. I was thinking to get the 9s because it would fit in my GunVault by my bed, but when I talked to AAC they said it wasn't safe to be fired dry indoors. However he did say that I could put in Wirenut gel and should last a good while but not sure exactly how long (It's better than water). The 762-SDN-6 is mainly meant for the ACR. It's really good for 300 BLK. But what I liked about that can is the versatility to be able to use it from a 30 cal bullet down to a .223 cal bullet and maybe even 17hmr or .22lr. If I got an AK or if Freedom Group releases the Massound I could use it either place. And the Titan-SS is for my Rem 700's. My main go to 700 is a 7mm Rem Mag. I lay patios in the summer, so I would need to have a good summer to afford all of that. First priority I feel is the Ti-Rant just because it is my home defense bedside gun.
 

· Registered
Joined
·
1,621 Posts
Agreed, the advantage of being able to hear after firing a shot or two in a home defense situation could be a big advantage...Maybe it would be better to go with a dry can, I am not sure what the options are.
The Ti-RANT 45 is designed as dry can- quietest dry 45 can on the market, hearing safe by far.
 

· Registered
Joined
·
44 Posts
I have both the TI-RANT and an SWR HEMS-2 and they are pretty close, 45acp being a volume can and all, plus the swr was a hell of alot cheaper....
 

· Registered
Joined
·
1,621 Posts

· Registered
Joined
·
1,628 Posts
New to the whole ACR scene, is there one AAC muzzle device that is better suited to AAC cans for use on the ACR? That was a lot of capitals "A"s in one post.......
Any AAC muzzle device that will thread on will work fine as long as the silencer & muzzle device are compatible.... 51 tooth, 90 tooth, etc.
 
1 - 18 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top