ACR Forum banner

Acr 14.5" barrel question

180 Views 5 Replies 2 Participants Last post by  Navanava
I'm thinking of doing a 14.5" build with a pin/weld on the 51T AAC flash hider (2.5" long, about 3/4in of it would be lost, making it 1.8in so it'll come to about 16.3" total)

I'm not 100% sure on the overall lenght of the rifle however, factory specs for the lenght of a 16.5" barrel acr are difficult to find, I know these are measured with the stock folded, I found off a few websites they are 33" to the end of the stock and the stock is about 6.8".

I'm coming up with the 16.5" barrel being 26.2" long and the 16.3" being 26" exactly. Are these numbers correct, just want to make sure the rifle falls above or on 26".
1 - 6 of 6 Posts
27 5/8" with the stock folded and 16" barrel with AAC flash hider according to AR15.com. That's with them using the stock latch as the farthest point from the end of the flash hider.
27 5/8" with the stock folded and 16" barrel with AAC flash hider according to AR15.com. That's with them using the stock latch as the farthest point from the end of the flash hider.
That'll works out, seeing as it would come to about 30", mind linking me to where you found that?
That'll works out, seeing as it would come to about 30", mind linking me to where you found that?
28" exactly I mean
That'll works out, seeing as it would come to about 30", mind linking me to where you found that?
O/A folded length of Bushmaster ACR? - AR15.COM
1 - 6 of 6 Posts
Top