http://www.acrforum.com/forum/ All things ACR discussed here! en Sun, 20 May 2012 09:29:23 GMT vBulletin 60 http://www.acrforum.com/forum/images/misc/rss.png http://www.acrforum.com/forum/ http://www.acrforum.com/forum/showthread.php/2378-Should-I-Consider-an-ACR?goto=newpost Thu, 17 May 2012 15:15:08 GMT I currently have a 20" AR-15 and need a carbine, and like the idea of a piston based just for ease of cleaning, so not a DI hater. Still, I'm looking at piston guns. I was primarily looking at piston AR-15's, specifically the PWS MK1 series; likely the MK114 or maybe going SBR with the MK112 or even MK110. I've read good about the LWRC as well, and a few others, but the MK1 seems to have struck me the most of my AR options.

In looking up piston AR's, one thing you hear from time to time is to look at the guns built for pistons from the ground up. I've read more than a few of the ACR vs. SCAR Wars threads (each promising A New Hope or something to the effect). The SCAR seems fine, however there are a few things that draw me to the ACR. Most notably, cost and aftermarket availability. The ACR gets a significant nod on the first being somewhat close to the piston AR's and a slight nod on the second since the aftermarket for ACRs and SCARs is still building.

So I am wondering if I should consider the ACR. I am looking for something accurate and reliable, reasonably lightweight, reliable, ergonomic, did I mention reliable(?), easy to clean and maintain, and, well, piston-driven. I'd also like something fun to shoot. I would also really like the idea of a modular gun that I can add a few accessories to. I am told I need rails and lots of accessories to be "tacticool." (Just kidding). In all seriousness, I just want something that will meet most of the requirements and have a long life shooting lead downrange. Anything else would be just for customizing to my own tastes. Nothing really dramatic, I do not really want a ton of stuff hanging from my gun, just want to be able to add stuff that might make it better or more fun for me to shoot.

Any thoughts how well the ACR might or might not fit these needs, or helping me decide which way to go? Anybody try the PWS MK114 or MK1 series AND the ACR that cares to chime in? Is there any inclination as to whether Remington will make their version available commercially, or if Bushmaster might adopt some of the changes into their version? I know I'm on an ACR forum, so it's understandable if you all nudge me toward the ACR, I'm just looking for any insight I can get to make an informed decision. Thanks in advance!

-Cheers ]]> ACR General Discussion Dave_I http://www.acrforum.com/forum/showthread.php/2378-Should-I-Consider-an-ACR http://www.acrforum.com/forum/showthread.php/2376-New-to-ACR?goto=newpost Thu, 17 May 2012 13:39:55 GMT Hi, just joined up. I'm interested in the ACR developments; haven't really been in the loop last few years and was thinking about getting one of these. Had a couple questions.

The differences between the Remington and the Bushmaster; what are they? I see the forearm looks different, and I know it weighs less so I assume the barrel is lightweight profile but is it a different twist?
Is the Remington product Military only, or is it being marketed to LEO as well? ]]> ACR General Discussion 3000fps http://www.acrforum.com/forum/showthread.php/2376-New-to-ACR http://www.acrforum.com/forum/showthread.php/2372-Remington-Defense-now-selling-quot-mil-only-quot-XM2010s-to-civis?goto=newpost Wed, 16 May 2012 05:01:08 GMT maybe this means Remington ACR accessories will soon follow... maybe this means Remington ACR accessories will soon follow... ]]> ACR General Discussion cochraneap http://www.acrforum.com/forum/showthread.php/2372-Remington-Defense-now-selling-quot-mil-only-quot-XM2010s-to-civis http://www.acrforum.com/forum/showthread.php/2366-MVG-RVG-grips-should-take-MIAD-grip-pods?goto=newpost Mon, 14 May 2012 05:04:59 GMT I was contemplating the empty hole (and wrong shade) of my MVG and how I'll finally use my grip pod in the ACR grip if/when I get a weapon light mounted, and thinking they should make a new MVG/RVG that could also take the grip pods and still be optimized for thumb over bore grip (shape is perfect for the palm!) or traditional use.

And hoping Bushmaster/Magpul would make a bolt carrier grip so I could have batteries and a spare bolt/pin at the same time in the same weapon. Ideally it would be designed for the ACR bolt/pin as well as be available in coyote brown. ]]> ACR General Discussion Uxi http://www.acrforum.com/forum/showthread.php/2366-MVG-RVG-grips-should-take-MIAD-grip-pods http://www.acrforum.com/forum/showthread.php/2363-What-aftermarket-parts-do-ACR-owners-most-want-to-see-produced?goto=newpost Sun, 13 May 2012 01:14:35 GMT So I wanted to know what other people are looking for regarding their ACR's?

I've seen people talking about metal selector switches, alternate lowers, barrel conversion kits, and right/dual side charging handles. What else is on your whish list??? ]]> ACR General Discussion Gunsmith.JM http://www.acrforum.com/forum/showthread.php/2363-What-aftermarket-parts-do-ACR-owners-most-want-to-see-produced http://www.acrforum.com/forum/showthread.php/2361-spotted-low-serial-number-acr-today-1500?goto=newpost Sat, 12 May 2012 22:29:11 GMT It was a black basic with a s/n under 500. It was in a dark case so I couldn't tell if it was used. Didn't look it. Maybe slightly if I was only going off the low numbers. It did have a rail panel attached. But I didn't ask if it was used. They have another they're asking more for. Its in enyon Pennsylvania about 15 minutes from me. Just figured if put it out there. ]]> ACR General Discussion oif0709 http://www.acrforum.com/forum/showthread.php/2361-spotted-low-serial-number-acr-today-1500 http://www.acrforum.com/forum/showthread.php/2356-Any-aftermarket-options-for-gas-systems-on-barrel-conversions?goto=newpost Fri, 11 May 2012 22:17:46 GMT I was looking into aftermarket piston conversions for the AR platform as a possible shortcut to producing my own caliber conversions. I haven't taken the measurements but I'm sure the gas-block height would be different than an AR's which would require a custom block to begin with. Has anyone else looked into this possibility as of yet or am I barking up the wrong tree altogether?

As an aside, I currently work for a shop that would have no problem producing a knock-off gas system but I'd rather not have to put it in for quote or go the "government work" route if at all possible. ]]> ACR General Discussion Gunsmith.JM http://www.acrforum.com/forum/showthread.php/2356-Any-aftermarket-options-for-gas-systems-on-barrel-conversions http://www.acrforum.com/forum/showthread.php/2353-ACR-at-cabelas?goto=newpost Thu, 10 May 2012 19:02:04 GMT Anyone in the AZ area cabelas in Glendale has a few basics for $1599!! That's the cheapest I've seen ]]> ACR General Discussion tr6uma http://www.acrforum.com/forum/showthread.php/2353-ACR-at-cabelas http://www.acrforum.com/forum/showthread.php/2345-Caliber-conversion-thread-locking-and-belly-aching.?goto=newpost Tue, 08 May 2012 17:02:53 GMT I had just mentioned on a previous thread regarding the catalog for 2012 that the promised 300 blk was not listed. Belly aching issued (a nauseating... I had just mentioned on a previous thread regarding the catalog for 2012 that the promised 300 blk was not listed. Belly aching issued (a nauseating topic apparently) and the thread was locked. Unless I missed something there are more nauseating threads regarding coyote tan/ dark earth mismatch ect than all other topics combined. I have read nearly every thread on this board. I know why green residue is in front of my gas block, most members don't ( unfortunately). Incessant thread locking or bitching about posts/threads of apparent interest will chase members elsewhere. ]]> ACR General Discussion Devil Doc http://www.acrforum.com/forum/showthread.php/2345-Caliber-conversion-thread-locking-and-belly-aching. http://www.acrforum.com/forum/showthread.php/2343-2012-catalog?goto=newpost Tue, 08 May 2012 14:23:18 GMT I emailed bushmaster and asked about the new catalog. They replied a week later and said it can be requested through thier website and that they are... I emailed bushmaster and asked about the new catalog. They replied a week later and said it can be requested through thier website and that they are sending me one. Just thought I would share with y'all cuz I thought it wasn't supposed to be out yet. ]]> ACR General Discussion Wolfpack http://www.acrforum.com/forum/showthread.php/2343-2012-catalog http://www.acrforum.com/forum/showthread.php/2339-ACR-Accuracy?goto=newpost Mon, 07 May 2012 07:38:27 GMT I'm still fixing to buy an ACR, but just how accurate is it out to around 300+ yards?? And how closely does it maintain after the barrel has been removed/replaced? Thanks! ]]> ACR General Discussion Bludlow http://www.acrforum.com/forum/showthread.php/2339-ACR-Accuracy http://www.acrforum.com/forum/showthread.php/2325-ICC-Phase-1-Completed?goto=newpost Thu, 03 May 2012 17:30:03 GMT Military Times Gear Scout is reportining today that Phase 1 of the Army Individual Carbine Competition has been completed. They're saying that supposedly only 5 companies remain standing and that the only one they've been able to confirm is Remington. ]]> ACR General Discussion jpann http://www.acrforum.com/forum/showthread.php/2325-ICC-Phase-1-Completed http://www.acrforum.com/forum/showthread.php/2322-new-guy-here-new-acr-owner?goto=newpost Thu, 03 May 2012 00:58:34 GMT New to this forum, but not new to gun forums in general or guns in general. Wanted to introduce myself and find out if anyone is currenlty running... New to this forum, but not new to gun forums in general or guns in general. Wanted to introduce myself and find out if anyone is currenlty running an ACR for multigun or 3 gn type stuff.

I have a coyote enhanced gun i recently got and plan on using it for 3 gun in the coming months at our local match.

just curious if anyone is currently running an ACR, and if you feel it is at an advantage/disadvantage or even playing ground and why

thanks. ]]> ACR General Discussion KouchKommando http://www.acrforum.com/forum/showthread.php/2322-new-guy-here-new-acr-owner http://www.acrforum.com/forum/showthread.php/2316-The-ACR-looks-much-better-with-Olive-Drab-furniture...?goto=newpost Mon, 30 Apr 2012 13:21:04 GMT See.... Image: http://i180.photobucket.com/albums/x222/linx310/acr/acr1.jpg Image:... See....






I washed the stock to degrease it.
Sprayed it with 2 coats of bulldog adhesion promoter.
Then gave it 4 coats of Krylon olive drab camo. Each coat was spaced out between 10-15 minutes.

I put the furniture back on the rifle about 6 hours later. Gonna let it sit for a week or two before moving the stock parts around so it fully cures. I used this same paint on my KLR650 and it could take a beating. ]]> ACR General Discussion linx310 http://www.acrforum.com/forum/showthread.php/2316-The-ACR-looks-much-better-with-Olive-Drab-furniture... http://www.acrforum.com/forum/showthread.php/2298-300-AAC-Blackout-update?goto=newpost Thu, 26 Apr 2012 17:32:52 GMT Has anyone heard anything new about Bushmaster/Remington releasing a 300 blackout barrel? Seeing that the Freedom Group owns Remington/Bushmaster as... Has anyone heard anything new about Bushmaster/Remington releasing a 300 blackout barrel? Seeing that the Freedom Group owns Remington/Bushmaster as well as developed the 300 blk it would make sense... ]]> ACR General Discussion rugbydino http://www.acrforum.com/forum/showthread.php/2298-300-AAC-Blackout-update